Vacon 20CP Installation, Technical And Maintenance Manual

Also see for 20 CP: User manual Installation, Technical and Maintenance Manual

Contents

Vacon 20CP Installation, Technical And Maintenance Manual Manual pdf 22 page image

vacon • 19 Receipt of delivery22.3 Unpacking and lifting the AC driveThe weights of the AC drives vary according to frame size. Note the weights of each individualframe size in Table 4 below.Table 4. Frame weights.VACON ® 20 Cold Plate drives have undergone scrupulous tests and quality checks at the fac-tory before they are delivered to the customer. However, after unpacking the product, checkthat no signs of transport damage are to be found on the product and that the delivery is com-plete.Should the drive have been damaged during shipping, please contact the cargo insurance com-pany or the carrier in the first instance.2.4 AccessoriesAfter lifting the converter out, check that the delivery is complete and the following accessoriesare included in the plastic bag:Figure 8. STO connector.Frame Weight [kg] Weight [lb]MS2 2 4.4MS3 3 6.6Item Quantity PurposeSTO terminal connector **. Included only in the MS2 three-phase version and MS3.1 Six pin black connector (seeFigure 8) to use STO functionM3.5 x 8 TapTite screw 4 Screws for control cable clampsM1-3 Cable clamp 2 Clamping control cables