Vacon CXL User Manual

Also see for CX: Manual Manual Service manual Manual User manual

Vacon CXL User Manual Manual pdf 20 page image

VACON CX Profibus user’s manual Page 20________________________________________________________________________________________________________________________________________________________________________________Vacon Oyj Phone +358-201-2121 Fax: +358-201-212 205V9 Operating day counter DD.dd Operating days 1), not resetableV10 Operating hours, "tripcounter”HH.hh Operating hours 2), can be reset with program-button#3V11 MW-hours 0,001 MWh Total amount of MW-hours, not resettableV12 MW-hours, "trip counter" 0,001 MWh MW-hours, can be reset with programmable button#4V13 Voltage/analogue input 0,01 V Voltage of the terminal Uin+ (control board)V14 Current/analogue input 0,01 mA Current of terminals Iin+ and Iin- (control board)V15 Digital input status, gr. A 0 = Open Input, 1 = Closed Input (Active)V16 Digital input status, gr. B 0 = Open Input, 1 = Closed Input (Active)V17 Digital and relay outputstatus0 = Open Input, 1 = Closed Input (Active)V18 Control program Version number of the control softwareV19 Unit nominal power 0,1 kW Shows the power size of the unitV20 Motor temperature rise 1 % 100% = temperature of motor has risen to nominalvalueTable 7-1 Monitored Items1) DD = full days, dd = decimal part of a day2) HH = full hours, hh = decimal part of an hourFor Special Actual Values see Appendix B.7.4.2 Parameter Read and WriteThe Vacon variables and parameters can be read and written using the Parameter Read/Write function.Profibus parameters according to parameter numbers are as follows.ParameterNumberVacon parameter group Vacon parameter number101 - 199 Group 1 1 - 99201 - 299 Group 2 1 - 99. .. .801 - 899 Group 8 1 - 99901 - 999 Profibus DP parameter1001 - 1099 Group 9 1 - 99. .. .1901 - 1999 Group 18 1 - 99Numbering of the parameter as well as parameter ranges and steps can be found in the applicationmanual in question. The parameter value should be given without decimals. The Profibus DPparameter group can be set by the Profibus DP master only, not on the VACON CX control panel.7.4.3 Fault CodeWhen a fault is active, fault codes can be read using the Parameter Read function. Profibus parameternumber according to the fault code is as follows.Parameter number Vacon variable99 Active fault codeList and description of the fault codes are in VACON CX/CXL/CXS USER’S MANUAL