Vacon NXL series User Manual

Also see for NXL series: User manual User manual

Contents

Vacon NXL series User Manual Manual pdf 1 page image

AT LEAST THE 11 FOLLOWING STEPS OF THESTART-UP QUICK GUIDE MUST BE PERFORMEDDURING THE INSTALLATION AND COMMISSIONING.IF ANY PROBLEMS OCCUR, PLEASE CONTACT YOUR LOCAL DISTRIBUTOR.Start-up Quick Guide1. Check that the delivery corresponds to your order, see Chapter 3.2. Before taking any commissioning actions read carefully the safety instructions inChapter 1.3. Before the mechanical installation, check the minimum clearances around the unit andcheck the ambient conditions in Chapter 5.4. Check the size of the motor cable, mains cable, mains fuses and check the cableconnections, read Chapter 6.5. Follow the installation instructions, see Chapter 5.6. Control cable sizes and the grounding system are explained in Chapter 6.1.1.7. Instructions on using the keypad are given in Chapter 7.8. All parameters have factory default values. In order to ensure proper operation, checkthe rating plate data for the values below and the corresponding parameters ofparameter group P2.1. See Chapter 8.3.2.• nominal voltage of the motor, par. 2.1.6• nominal frequency of the motor, par. 2.1.7• nominal speed of the motor, par 2.1.8• nominal current of the motor, par. 2.1.9• motor power factor, cosϕ, par. 2.1.10All parameters are explained in the Multi-Control Application Manual.9. Follow the commissioning instructions, see Chapter 8.10. The Vacon NXL Frequency Converter is now ready for use.11. In the end of this manual, you will find a quick help with the default I/O, control panelmenus, monitoring values, fault codes and basic parametersVacon Plc is not responsible for the use of the frequency converters againstthe instructions.