Vacon NXL series User Manual
Also see for NXL series: User manualUser manual
                                                                                            | |
Contents
| 
60 • vacon Control keypadTelephone: +358-201-2121 • Fax: +358-201-212 20577.4.3 Keypad control menu (K3)In theKeypad Controls Menu, you can choose the control place, edit the frequency reference andchange the direction of the motor. Enter the submenu level with theMenu button right.Parameters in MenuK3SelectionsP3.1 = Selection of controlplace1 = I/O terminals2 = Keypad3 = FieldbusR3.2 = Keypad referenceP3.3 = Keypad direction 0 = Forward1 = ReverseP3.4 = Stop button activation0 = Limited function of Stopbutton1 = Stop button alwaysenabledP3.5 = PID reference 1P3.6 = PID reference 27.4.3.1 Selection of control placeThere are three different places (sources) which the frequency converter can be controlled from. Foreach control place, a different symbol will appear on the alphanumeric display:Control place SymbolI/O terminalsI/O termKeypad (panel)KeypadFieldbusBus/CommChange the control place by entering the edit mode with theMenu button right. The options can thenbe browsed through with theBrowser buttons. Select the desired control place with theEnterbutton. See the diagram below. See also Chapter 7.4.3 above.Figure 7-7. Selection of control placeenterSTOP I/O termREADYSTOP I/O termREADYSTOP I/O termREADYSTOP I/O termREADYSTOP I/O termREADY |
Related manuals for Vacon NXL series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine