Control keypad vacon • 6524-hour support: +358-40-8371 150 • Email: vacon@vacon.com 755 Actual valuesupervisionActual value has exceeded or fallenbelow (depending on par. 2.7.22) theactual value supervision limit (par.2.7.23)Table 7-4. Fault codes7.4.5 Fault history menu (H5)TheFault history menu can be entered from theMain menu by pushing theMenu button right whenthe location indication H5 is visible on the keypad display.All faults are stored in theFault history menu in which you can browse through them using theBrowser buttons. You can return to the previous menu anytime by pushing theMenu button left.The memory of the frequency converter can store a maximum of 5 faults in the order of appearance.The latest fault carries the indication H5.1, the second latest H5.2 etc. If there are 5 uncleared faultsin the memory the next occurring fault will erase the oldest from the memory.Pressing theEnter button for about 2 to 3 seconds resets the whole fault history.Figure 7-9. Fault history menuSTOP I/O termREADYSTOP I/O termREADYSTOP I/O termREADYnxlk20.fh8Push Enter to reset!
