Vacon NXP series User Manual
Also see for NXL series: User manualUser manual
                                                                                      | |
Contents
| 
1vacon • 12 General informationLocal contacts: http://drives.danfoss.com/danfoss-drives/local-contacts/1.9 Option board related parametersSome of the input and output functions of certain option boards are controlled with associatedparameters. The parameters are used to set the signal ranges for analogue inputs and outputs aswell as values for different encoder functions.The board-related parameters can be edited in the Expander Board Menu (M7) of the controlkeypad.Enter the following menu level (G#) with the Menu button right. At this level, you can browse throughslots A to E with the Browser buttons to see what expander boards are connected. On the lowermostline of the display you also see the number of parameters associated with the board. Edit theparameter value as shown below. For more information on the keypad operation, see VACON ® NXS/P User Manual. See Figure 9.Figure 9. Board parameter value editingNOTE: Fieldbus boards (OPTC_) also have fieldbus-related parameters. These boards are, however,described in the separate fieldbus board manuals (see http://drives.danfoss.com/knowledge-center/technical-documentation/).G1G5RE ADYI/Oter mC:NXOPTC1RE ADYI/Oter mG1G2RE ADYI/Oter mRE ADYI/Oter menterP1P4D:NXOPTC2R EA DYI/OtermG1G2R EA DYI/OtermV1V2RE ADYI/Oter mR EA DYI/OtermExpander boards ParametersSlave address126CHANGE VALUECONFIRM CHANGESlave address126Baud rateAutoMonitor7232.emf |
Related manuals for Vacon NXL series
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine