Vaderstad Rapid RDA 400S Original Instructions Manual
Also see for Rapid RDA 400S: Instructions
                                                                                                                                          | |
Contents
| 
Safety regulations12 27.06.2011ver. 21.4 Other safety precautions! Observe the greatest caution when transporting the seed drill on a public road. If the machinehas a full hopper, note that the towed weight is considerable and that the view to the rear isgreatly restricted. Check the adjustment of the tractor's rear-view mirrors. If the machine is tobe transported over a longer distance, be sure to block the lifting ram of the centre section withthe yellow mechanical locking device, see ”3.16 Locking the lifting rams during service” onpage 39. The owner/operator is solely responsible for transport of the seed drill on publicroads. Use the lights on the drill according to the local traffic regulations.! NOTE! This machine/equipment together with its tyres is designed for a maximum speed of30 km/h, during transportation on the road.! Make sure that at least 20% of the tractor's weight is resting on its front wheels when the drillhas been hitched and loaded. This will ensure full steering ability of the tractor train.! When any repair work is carried out on the hydraulic system, the seed drill should be in thelowered position and resting on a firm and level surface with the wing sections lowered!! Never stand under the intermediate packer or drill if it is suspended and only secured with thetractor's hydraulic lifting arms. Prior to any service on the intermediate packer, be sure to se-cure it properly with trestles, etc. on firm, level ground.! Be sure to set the master cylinder stopper in such a way that the drill rests on both the wheelsand the discs when parked. Since the weight on the supporting leg is so high, the machine shallnot be parked on loose surface!! Always make sure that the seed drill's male couplings and the tractor's female couplings areclean and free from impurities before connecting them together.! Always use genuine Väderstad spare parts to maintain the quality and reliability of the seeddrill. If other brands of spare parts are used, all guarantee and claim commitments cease to bevalid.! Regularly inspect the wear on the drill's towing eyelet. Replace the towing eyelet when it hasbeen worn down to the wear limit. See ”5.2 Inspecting the drill's towing eyelet” on page 93.! Any welding work on the machine/implement should hold professional standard.Incorrect welding may result in serious injuries or possibly fatal injuries. If in doubt, contact aprofessional welding service for proper instructions.! Never look straight into the optics of the radar when it is operating! There is a risk of permanentdamage to the eyesight! (Hydraulic feed output).! When cleaning the drilling system or when servicing the transmission system on machineswith hydraulic feed output, the hydraulic flow to the fan and feed output driving mechanismmust always be shut off beforehand. |
Related manuals for Vaderstad Rapid RDA 400S
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine