4 Operating10 Instructions for use VRC 470 0020116689_01Desired day temperatureOnly today: 18°CFor permanent changePress OKOKIn the display, a request appears asking if you want tochange the Desired day temperature for the current day oron a permanent basis.4.2.1.1 To change the Desired day temperature forthe current day only▶ Turn the rotary knob to set the desired temperature.◁ The display switches back to the basic display after12 seconds. The set desired temperature applies onlyuntil the end of the active time period of the currentday.4.2.1.2 Changing the Desired day temperaturepermanently1. Turn the rotary knob to set the desired temperature.2. Press the right-hand selection button, OK.◁ The display switches to the basic display. The newdesired day temperature is applied permanently.4.2.2 Operating example, changing the dateAuto 5,0°C°C19,5 15:34Desired heating temp. 20,0°CMenu Op. mode1. If the display does not show the basic display, press theleft-hand selection button, Back, until the basic displayappears again.2. Press the left-hand selection button, Menu.◁ The controller is now in selection level 1. The left-hand selection button now has the function Back(to go back to the previous level), the right-handselection button has the function Select (to selectthe highlighted menu option).MenuInformationDesired temperaturesTime programmesBack Select3. Turn the rotary knob until the Basic settings list entryis highlighted.MenuDays away from home schedulingDays at home schedulingBasic settingsBack Select4. Press the right-hand selection button, Select.◁ The controller is now in selection level 2.Basic settingsLanguageDate/timeDisplayBack Select5. Turn the rotary knob until the Date/Time list entry ishighlighted.Basic settingsLanguageLanguageDate/timeDate/timeDisplayBack Select6. Press the right-hand selection button, Select.◁ The controller is now in the Date setting level. Thevalue for the day is highlighted. The left-hand selec-tion button now has the function Back (to go back tothe previous level), the right-hand selection buttonhas the function Change (the value).