Vaillant VRC 470 Instruction Manual

Also see for VRC 470: Operating instructions Instruction manual Installation insrtuctions Installation instructions

Contents

Appendix0020116689_01 VRC 470 Instructions for use 23AppendixA Operating modesOperating mode Setting Factory reset Own settingOperating modeHeating Auto AutoDay Not activeSet-back Not activeSummer Not activeCooling Auto Not activeDay Not activeOff OffVentilation Auto AutoDay Not activeSet-back Not activeDomestic hot water Auto AutoDay Not activeOff Not activeAdvanced functionsManual cooling Active, Not active Not active1 day at home Active, Not active Not active1 day away from home Active, Not active Not active1 x ventilation boost Active, Not active Not activeParty function Active, Not active Not activeCylinder boost Active, Not active Not activeSystem OFF (Frost protection active) Active, Not active Not activeB Overview of operating levelsSetting level Values Unit Increment/Select Factory reset SettingMin. Max.Information → System status →SystemStatus Current valueWater pressure Current value barDomestic hot water Current value Charged, ChargingCollector temperature1) or 6) Current value ℃Solar yield1) or 6) Current value kWhReset solar yield 1) Current value Yes, No NoEnvironment yield 5) Current value kWhReset environment yield 5) Current value Yes, No No1) Appears only if the VR 68/2 solar module is connected.2) Appears only if the VR 61/4 mixer module is connected.3) Appears only if the VR 81/2 remote control unit is connected.4) This value depends on the expansion module connected. If no expansion module is connected, the upper limit may be limited by thesetting on the boiler.5) Appears only if a heat pump is connected.6) Appears only if the VMS solar pump unit is connected.7) Appears only if the recoVAIR.../4 ventilation unit is connected and the VRC 470/4 controller is used.8) Appears only if a hybrid heat pump is connected.