Vaillant VWL 35/5 AS 230V S2 Operating Instructions Manual

Also see for VWL 105/5 AS S2: Operating, installation and maintenance instructions Operating instructions Operating instructions

Contents

DK, Danmark 10020257297_02 aroTHERM Country specifics 203Country specifics1 DK, Danmark– Denmark –1.1 Eftersyn og serviceIfølge Dansk lovgivning skal produkter der indeholder enkølemiddel fyldning større end 1 kg, efterses mindst en gangårligt, af en person der opfylder kvalifikationskravene for atudføre service på sådanne anlæg.1.2 GarantiVaillant yder en garanti på to år regnet fra opstartsdatoen,dog 10 år på scrollkompressoren i flexoTHERM. I denne ga-rantiperiode afhjælper Vaillant kundeservice gratis materiale-eller fabrikationsfejl.For fejl, som ikke skyldes materiale- eller fabrikationsfejl,f.eks. på grund af en usagkyndig installation eller ureglemen-teret anvendelse, påtager Vaillant sig ikke noget ansvar.Fabriksgarantien dækker kun, når installationen er udførtaf en vvs-installatør /elinstallatør. Hvis der udføres service/reparation af andre end Vaillant kundeservice, bortfaldergarantien, medmindre dette arbejde udføres af en installatørmed de nødvendige kvalifikationer.1.3 KundeserviceVaillant A/SDrejergangen 3 ADK-2690 KarlslundeTelefon 46 160200Vaillant Kundeservice 46 160200Telefax 46 160220service@vaillant.dkwww.vaillant.dkVaillant Kundeservice: 46 160200E-Mail: service@vaillant.dk2 FI, Suomi, Finland– Finland –2.1 TakuuTakuu vastaa maanne lainmukaisia määräyksiä.2.2 AsiakaspalveluAsiakaspalvelumme yhteystiedot löytyvät takapuolellamainitun osoitteen alta tai WWW-sivulta osoitteestawww.vaillant.fi.3 GB, Great Britain3.1 Commissioning ChecklistYou can find the Commissioning Checklist at the end of thisdocument.3.2 GuaranteeVaillant provides a full parts and labour guarantee for thisappliance for the duration as shown on the enclosed re-gistration card which must be fully completed and returnedwithin 30 days of installation. All appliances must be installedby a suitably competent person fully conversant and in ac-cordance with all current regulations applicable to the ap-pliance type installation. In the case of gas appliances theGas Safety (Installation and Use) Regulations 1998, and themanufacturer’s instructions. In the UK competent personsapproved at the time by the Health and Safety Executive un-dertake the work in compliance with safe and satisfactorystandards. Installers should also be fully conversant with andcompetent with all necessary electrical and building regula-tions that may apply to the installation.In addition all unvented domestic hot water cylinders mustbe installed by a competent person to the prevailing build-ing regulations at the time of installation (G3). All appliancesshall be fully commissioned in accordance with our installa-tion manual and Benchmark commissioning check list (thiswill be included within the installation manual). These mustbe signed and given to the user for safe keeping during thehand over process. Installers should also at this time advisethe user of the annual servicing requirements and advise ofappropriate service agreement.Terms and conditions do apply to the guarantee, details ofwhich can be found on the registration card included with thisappliance. In order to qualify for guarantee after one year theappliance must be serviced in accordance with our installa-tion manual servicing instructions. The benchmark servicehistory should be completed. Note - all costs associated withthis service are excluded from this guarantee.Failure to install and commission this appliance in compli-ance with the manufacturer’s instructions will invalidate theguarantee (this does not affect the customer’s statutoryrights).3.3 Customer serviceFor contact details for our customer service department, youcan write to the address that is provided on the back page,or you can visit www.vaillant.co.uk.3.4 BenchmarkVaillant is a licensed member of the Benchmark Scheme.Benchmark places responsibilities on both manufacturersand installers. The purpose is to ensure that customers areprovided with the correct equipment for their needs, that it isinstalled, commissioned and serviced in accordance with themanufacturer’s instructions by a competent person approvedat the time by the Health and Safety Executive and that itmeets the requirements of the appropriate Building Regu-lations. The Benchmark Checklist can be used to demon-strate compliance with Building Regulations and should beprovided to the customer for future reference.Installers are required to carry out installation, commission-ing and servicing work in accordance with the Benchmark