Installation and Servicing ecoTEC plus184.1.4 Contents included with deliveryThe Vaillant ecoTEC plus is delivered pre-mounted ina package unit. Check that all the parts have beendelivered intact (see fig. 4.2 and table 4.1.DO NOT remove the boiler from the polystyrene baseat this stage.Place aside the flue adaptor and connections packuntil required.NoteCare should be taken not to scratch the whitesurface of the boiler casing.4 .2 Flue exitRefer to flue system installation instructions for fulldetails.Danger!Vaillant appliances are certified only for usewith genuine Vaillant flue pipes. Only usegenuine Vaillant flue pipes. Malfunctions canoccur if you use other accessories. These mayresult in damage and injury. You will find a listof genuine flue pipes in the Vaillant installationmanual for flue pipes.The CE mark is valid only if the appliance isoperated with Vaillant flue pipes.4.2.1 Other flue optionsFlue instructions for other flue systems such asvertical RSF flues, flues run to the side of the boilerand the use of additional bends etc. are detailed in theflue installation instructions.4 Boiler installation sequenceFig. 4.2 Contents included with deliveryTable 4.1 Contents included with deliveryItem Quantity Description1 1 Boiler2 1 Hanging bracket3 1 Flue connection adaptor4 1 Instruction booklets5 2 Guarantee card, envelope and log book6 1 Template7 1 Screws/wallplugs8 1 Gas service valve, compression couplersand condense drain pipe coupler31245 768Supplied by HeatingSpares247.com