Vaillant ecoTEC plus 612 Instructions For Installation And Servicing

Also see for ecoTEC plus 612: Instructions for use Instructions for installation and servicing Installation and maintenance instructions Instructions for use Installation and maintenance manual

Contents

Vaillant ecoTEC plus 612 Instructions For Installation And Servicing Manual pdf 17 page image

17Instructions for installation and servicing ecoTEC / 839592_094 Boiler installation sequence4.1 Transporting the applianceCaution!With regards to the Manual HandlingOperations, 1992 Regulations, the following liftoperation exceeds the recommended weight fora one man lift.General recommendations when handlingClear the route before attempting the lift. Ensure safelifting techniques are used – keep back straight – bendusing legs. Keep load as close to body as possible. Donot twist – reposition feet instead. If 2 persons perform-ing lift, ensure co-ordinated movements during lift.Avoid upper body/top heavy bending - do not lean for-ward/sideways. Recommend wear suitable cut resistantgloves with good grip to protect against sharp edgesand ensure good grip. Always use assistance if required.Removal of carton from delivery vanRecommend 2 person lift or 1 person with use of sacktruck. If 1 person is performing lift, straddle the load, tiltand place carton into position on truck. Recommendsecure appliance onto truck with suitable straps. Ensuresafe lifting techniques are used – keep back straight –bend using legs. Keep load as close to body as possible.If 2 persons performing lift, ensure co-ordinated move-ments during lift. Always use assistance if required.Carriage of carton from point of delivery to point ofinstallation – ground floor.Recommend 2 person lift or 1 person with use of sacktruck. If 1 person is performing lift, straddle the load, tiltand place carton into position on truck. Recommendsecure appliance onto truck with suitable straps. Ensuresafe lifting techniques are used – keep back straight –bend using legs. Keep load as close to body as possible.If 2 persons performing lift, ensure co-ordinated move-ments during lift. Clear the route before attempting thelift. If removing boiler from truck straddle the load andtilt forwards to facilitate secure grip. Ensure safe liftingtechniques are used – keep back straight – bend usinglegs. Do not twist – reposition feet instead. Take care toavoid trip hazards, slippery or wet surfaces and whenclimbing steps and stairs. Always use assistance ifrequired.Carriage of carton from point of delivery to point ofinstallation – first or higher floor, cellar.Recommend 2-person lift or 1 person with use of sacktruck. If 1 person is performing lift, straddle the load, tiltand place carton into position on truck. Recommendsecure appliance onto truck with suitable straps. Ensuresafe lifting techniques are used – keep back straight –bend using legs. Keep load as close to body as possible.If 2 persons performing lift, ensure co-ordinated move-ments during lift. Avoid upper body/top heavy bending -do not lean forward/sideways. Clear the route beforeattempting the lift. If removing boiler from truck strad-dle the load and tilt forwards to facilitate secure grip.Ensure safe lifting techniques are used – keep backstraight – bend using legs. Do not twist – reposition feetinstead. Take care to avoid trip hazards, slippery or wetsurfaces and when climbing steps and stairs. Always useassistance if required.Carriage of carton from point of delivery to point ofinstallation – roofspace.Recommend 2-person lift. Ensure co-ordinated move-ments during lift. Avoid upper body/top heavy bending -do not lean forward/sideways. Clear the route beforeattempting the lift. Take care to avoid trip hazards, slip-pery or wet surfaces and when climbing steps and stairs.When transferring appliance into roofspace, recommend1 person to be in roofspace to receive the appliance andother person to be below to pass up and support appli-ance. Ensure safe lifting techniques are used – keep backstraight – bend using legs. Keep load as close to body aspossible. Always use assistance if required. It is assumedsafe access, flooring and adequate lighting are providedin the roof space. It is recommended a risk assessmentof the roof space area be carried out before moving theappliance into the area to take into account access, sta-bility of flooring, lighting and other factors, and appro-priate measures taken.Unpacking of appliance from carton.Recommend 2 persons unpack appliance from carton.Always keep working area clear. Recommend cut baseend of carton and open carton flaps, then tilt boiler for-wards from its side onto its base and remove carton bysliding up over the boiler. Ensure safe lifting techniquesare used – keep back straight – bend using legs. Keepload as close to body as possible. Always use assistanceif required. Dispose of packaging in a responsible man-ner. Recommend wear suitable cut resistant gloves withgood grip to protect against sharp edges and ensuregood grip when handling appliance outside packaging.Positioning of Appliance for Final Installation –no obstructions.This appliance is deemed to be a one person lift whenremoved from the carton. Fit bracket securely onto wallbefore lifting appliance into position. Obtain firm grip onfront and sides of appliance, lift upwards, ensure stablebalance achieved and lift upwards to position in place onbracket. Ensure safe lifting techniques are used – keepback straight – bend using legs - when lifting load fromfloor level. Do not twist – reposition feet instead. Keepboiler as close as possible to body throughout lift tominimise strain on back. Ensure co-ordinated move-ments to ensure equal spread of weight of load. Alwaysuse assistance if required. Recommend wear suitablecut resistant gloves with good grip to protect againstsharp edges and ensure good grip when handling appliance.Boiler installation sequence 4