Vaillant ecoTEC pro 24 Installation And Maintenance Instructions Manual

Also see for ecoTEC pro 24: Instructions for use Instructions for installation and servicing Instructions for installation and servicing Instructions for installation and servicing

4 Set-up10 Installation and maintenance instructions ecoTEC pro 0020244995_024.3 Transporting the product4.3.1 General▶ Hold the load as close as possible to your body. Do nottwist your body – instead, reposition your feet.▶ If the unit is being lifted by two persons, ensure yourmovements are coordinated during lifting.▶ Avoid bending your upper body – do not lean forwards orto the side.▶ Wear appropriate cut-resistant and non-slip gloves toprotect yourself against sharp edges and maintain a safeand secure grip.▶ If required, get somebody to assist you in this.4.3.2 Unloading the box from the delivery van▶ It is recommended that two people lift the unit together.▶ Lift the box using the straps provided.▶ Use safe lifting techniques – keep your back straight andbend your legs at the knee.▶ Hold the load as close as possible to your body.▶ If the unit is being lifted by two persons, ensure yourmovements are coordinated during lifting.▶ If required, get somebody to assist you in this.4.3.3 Transporting the box from the deliverypoint to the installation site – ground floor▶ It is recommended that two people lift the unit together.▶ Use safe lifting techniques – keep your back straight andbend your legs at the knee.4.4 Dimensions72020 624160125188100 1003535440A33818012521357984664 711 103 5 121 Flue pipe wall duct2 Product holder3 Heating flow (22 × 1.5diameter)4 Hot water connection(15 × 1.5 diameter)5 Gas connection(15 × 1.5 diameter)6 Cold water connection(15 × 1.5 diameter)7 Heating return (22 × 1.5diameter)8 R1 tundish/condensatetrap connection9 Flue pipe connection10 Condensate dischargeconnection, 19 mmdiameter11 Condensate trap12 Drain line/heating ex-pansion relief valveconnection, 15 mm dia-meter