Driving and operating 211System resetThe content of the traffic sign memorycan be cleared in the setting menu ofthe traffic sign assistant page byselecting Reset and confirm bypressing SET/CLR on the turn signallever or 9 on right steering wheelcontrol. Upon successful reset, achime will sound and the followingsymbol is indicated until the nexttraffic sign is detected.In some cases, traffic sign assistant iscleared up automatically by thesystem.FaultThe traffic sign assistant system maynot operate correctly when:● The area of the windscreen,where the front camera islocated, is not clean or affectedby foreign items, e.g. stickers.● Traffic signs are completely orpartially covered or difficult todiscern.● There are adverse environmentalconditions, e.g. heavy rain, snow,direct sunlight or shadows. In thisevent, No Traffic Sign Detectiondue to Weather is indicated onthe display.● Traffic signs are incorrectlymounted or damaged.● Traffic signs do not comply withthe Vienna Convention on trafficsigns (Wiener Übereinkommenüber Straßenverkehrszeichen).CautionThe system is intended to help thedriver within a defined speedrange to recognise certain trafficsigns. Do not ignore traffic signswhich are not displayed by thesystem.The system does not recogniseany other than the conventionaltraffic signs that might give or enda speed limit.Do not let this special featuretempt you into taking risks whendriving.Always adapt speed to the roadconditions.The driver assistance systems donot relieve the driver from fullresponsibility for vehicleoperation.Lane departure warningThe lane departure warning systemobserves the lane markings betweenwhich the vehicle is driving, via a frontcamera. The system detects lane