Technical data 147Identification plateThe identification plate is located onthe right hand door pillar.Information on identification plate1):1 = Manufacturer, type approvalnumber2 = Vehicle Identification Number3 = Permissible gross vehicleweight rating4 = Permissible gross combinationweight5 = Maximum permissible front axleload6 = Maximum permissible rear axleload7 = Vehicle-specific or countryspecific dataThe combined total of front and rearaxle loads must not exceed thepermissible gross vehicle weight. Forexample, if the front axle is bearing itsmaximum permissible load, the rearaxle can only bear a load that is equalto the gross vehicle weight minus thefront axle load.The technical data is determined inaccordance with EuropeanCommunity standards. We reservethe right to make modifications.Specifications in the vehicledocuments always have priority overthose given in this manual.Engine identificationIt is possible, using the VehicleIdentification Number (VIN), todetermine the engine type that isinstalled in your vehicle. For furtherinformation consult a workshop.1) The VIN plate on your vehicle may differ from the illustration shown.
