204 Technical dataIdentification plateThe identification plate is located onthe right hand door pillar.Information on identification plate:1 : vehicle identification number2 : permissible gross vehicleweight rating in kg3 : permissible gross train weightin kg4 : maximum permissible front axleload in kg5 : maximum permissible rear axleload in kg6 : trim code7 : technical specifications ofvehicle, including: Vehicle paintcode, equipment level andvehicle type8 : additional equipmentspecification9 : fabrication number10 : interior trim codeNoticeThe identification plate on yourvehicle may differ from theillustration shown.The combined total of front and rearaxle loads must not exceed thepermissible gross vehicle weight. Forexample, if the front axle is bearing itsmaximum permissible load, the rearaxle can only bear a load that is equalto the gross vehicle weight minus thefront axle load.The technical data is determined inaccordance with EuropeanCommunity standards. We reservethe right to make modifications.Specifications in the vehicledocuments always have priority overthose given in this manual.Engine identifier code and enginenumberStamped on the engine cylinder blockand on a label attached to the timingchain cover, depending on variant.Engine identificationThe technical data tables show theengine identifier code. Engine data3 206.To identify the respective engine,refer to the engine power in the EECCertificate of Conformity providedwith your vehicle or other nationalregistration documents.
