POS App Guide DIM Installation Examples30Gilbarco SmartCrind Dispenser SystemsTLS CONSOLE SOFTWARE REQUIREMENTSTLS-350R with BIR Software Requirements• System software Version 17 (or higher)• DIM software 349806-001 (or higher)TLS-450/TLS-450PLUS with BIR Software Requirements• TLS-450 System software Version 2.X (or higher)• TLS-450PLUS System software Version 6.X (or higher)• BIR option required (TLS-450)VEEDER-ROOT HARDWARE REQUIREMENTS (REF. TABLE 2)The following equipment is required to interface the TLS to the SmartCrind network:• One TCP/IP (TDIM) Interface Module• Ethernet cableSYSTEM LIMITATIONS• Up to Gilbarco single product or blending fueling positions are supported.• Only Gilbarco SmartCrind dispensers are supported.INSTALLATION NOTESExample wiring diagrams are shown in Figure 11 below.Figure 11. SmartCrind Installation401-16.epsPC (e.g.,back office)Plugs into PCEthernet cardEthernet cableEthernetcableTLS ConsolePlugs into RJ45connectorin TDIM moduleHubDo notuse uplinkconnector!X
