Vega VEGABAR 54 Operating Instructions Manual

Also see for VEGABAR 54: Product information Operating instructions Product information Operating instructions Operating instructions

Contents

Vega VEGABAR 54 Operating Instructions Manual Manual pdf 27 page image

276 Set up with the display and adjustment module PLICSCOMVEGABAR 54 • Foundation Fieldbus - climate compensated36791-EN-141001– Move to the menu overview– Confirm selected menu– Edit parameter– Save value• [->] key to select:– Menu change– Select list entry– Select editing position• [+] key:– Change value of the parameter• [ESC] key:– Interrupt input– Jump to next higher menuThe sensor is adjusted via the four keys of the display and adjust-ment module. The LC display indicates the individual menu items. Thefunctions of the individual keys are shown in the above illustration.Approx. 10 minutes after the last pressing of a key, an automatic resetto measured value indication is triggered. Any values not confirmedwith [OK] will not be saved.6.4 Setup stepsIn HART-Multidrop mode (several sensors on one input) the addressmust be set before continuing with the parameter adjustment. Youwill find a detailed description in the operating instructions manual"Display and adjustment module" or in the online help of PACTwareor DTM.HART modeStandardAddress 0VEGABAR 54 can be used for level as well as for process pressuremeasurement. Default setting is level measurement. The mode can bechanged in the adjustment menu.Depending on the application only the respective subchapter "Levelor process pressure measurement" is of importance. There, you findthe individual adjustment steps.Level measurementSet up VEGABAR 54 in the following sequence:1. Selecting adjustment unit/density unit2. Carry out a position correction3. Carry out min. adjustment4. Carry out max. adjustmentIn the menu item "Adjustment unit" you select the physical unit inwhich the adjustment should be carried out, e.g. mbar, bar, psi…Adjustment systemAddress setting HARTmultidropLevel or process pres-sure measurementParameter adjustment"Level measurement"