Vega VEGABAR 82 Operating Instructions Manual

Also see for VEGABAR 82: Product information Operating instructions Quick setup guide Operating instructions Operating instructions

Contents

153 Product descriptionVEGABAR 82 • Foundation Fieldbus45032-EN-171120162345Fig. 10: Hygienic installation of the measuring cell acc. to 3-A (example: Clampconnection)1 Measuring cell2 Seal for the measuring cell3 Process fitting4 Additional, front seal for measuring cell5 Diaphragm5 Hole for leakage detection3.3 Packaging, transport and storageYour instrument was protected by packaging during transport. Itscapacity to handle normal loads during transport is assured by a testbased on ISO 4180.The packaging of standard instruments consists of environment-friendly, recyclable cardboard. For special versions, PE foam or PEfoil is also used. Dispose of the packaging material via specialisedrecycling companies.Transport must be carried out in due consideration of the notes on thetransport packaging. Nonobservance of these instructions can causedamage to the device.The delivery must be checked for completeness and possible transitdamage immediately at receipt. Ascertained transit damage or con-cealed defects must be appropriately dealt with.Up to the time of installation, the packages must be left closed andstored according to the orientation and storage markings on theoutside.Unless otherwise indicated, the packages must be stored only underthe following conditions:• Not in the open• Dry and dust free• Not exposed to corrosive media• Protected against solar radiation• Avoiding mechanical shock and vibration• Storage and transport temperature see chapter "Supplement -Technical data - Ambient conditions"• Relative humidity 20 … 85 %With an instrument weight of more than 18 kg (39.68 lbs) suitable andapproved equipment must be used for lifting and carrying.PackagingTransportTransport inspectionStorageStorage and transporttemperatureLifting and carrying