Vega VEGABAR 82 Operating Instructions Manual

Also see for VEGABAR 82: Product information Operating instructions Quick setup guide Operating instructions Operating instructions

Contents

296 Set up with the display and adjustment moduleVEGABAR 82 • 4 … 20 mA45027-EN-1903206 Set up with the display and adjustmentmodule6.1 Insert display and adjustment moduleThe display and adjustment module can be inserted into the sensorand removed again at any time. You can choose any one of four differ-ent positions - each displaced by 90°. It is not necessary to interruptthe power supply.Proceed as follows:1. Unscrew the housing lid2. Place the display and adjustment module on the electronics in thedesired position and turn it to the right until it snaps in.3. Screw housing lid with inspection window tightly back onDisassembly is carried out in reverse order.The display and adjustment module is powered by the sensor, an ad-ditional connection is not necessary.Fig. 29: Installing the display and adjustment module in the electronics compart-ment of the single chamber housingNote:If you intend to retrofit the instrument with a display and adjustmentmodule for continuous measured value indication, a higher lid with aninspection glass is required.