Vega VEGABAR 82 Quick Setup Manual

Also see for VEGABAR 82: Product information Operating instructions Quick setup guide Operating instructions Operating instructions

Contents

Vega VEGABAR 82 Quick Setup Manual Manual pdf 15 page image

155 Set up with the display and adjustment moduleVEGABAR 82 • 4 … 20 mA/HART46306-EN-19040421100%0%5 m(196.9 ")Fig. 8: Parameter adjustment example "Min./max. adjustment, level measure-ment"1 Min. level = 0 % corresponds to 0.0 mbar2 Max. level = 100 % corresponds to 490.5 mbarIf these values are not known, an adjustment with filling levels of e.g.10 % and 90 % is also possible. By means of these settings, the realfilling height is then calculated.The real product level during the adjustment is not important, becausethe min./max. adjustment is always carried out without changing theproduct level. These settings can be made ahead of time without theinstrument having to be installed.5.3 Parameter adjustment - Extended adjustmentFor technically demanding measuring points, you can carry outextended settings in "Extended adjustment".The main menu is divided into five sections with the following func-tions:Setup: Settings, e.g., for measurement loop name, application, units,position correction, adjustment, signal outputDisplay: Settings, e.g., for language, measured value display, lightingDiagnosis: Information, e.g. on instrument status, pointer, measure-ment reliability, simulationAdditional adjustments: PIN, date/time, reset, copy functionMain menu