103 Product descriptionVEGACAP 66 • - contactless electronic switch30021-EN-160331foil is also used. Dispose of the packaging material via specialisedrecycling companies.Transport must be carried out in due consideration of the notes on thetransport packaging. Nonobservance of these instructions can causedamage to the device.The delivery must be checked for completeness and possible transitdamage immediately at receipt. Ascertained transit damage or con-cealed defects must be appropriately dealt with.Up to the time of installation, the packages must be left closed andstored according to the orientation and storage markings on theoutside.Unless otherwise indicated, the packages must be stored only underthe following conditions:• Not in the open• Dry and dust free• Not exposed to corrosive media• Protected against solar radiation• Avoiding mechanical shock and vibration• Storage and transport temperature see chapter "Supplement -Technical data - Ambient conditions"• Relative humidity 20 … 85 %3.5 Accessories and replacement partsThe protective cover protects the sensor housing against soiling andintense heat from solar radiation.You will find additional information in the supplementary instructionsmanual "Protective cover" (Document-ID 34296).Screwed flanges are available in different versions according to thefollowing standards: DIN 2501, EN 1092-1, BS 10, ASME B 16.5,JIS B 2210-1984, GOST 12821-80.You can find additional information in the supplementary instructionsmanual "Flanges according to DIN-EN-ASME-JIS".TransportTransport inspectionStorageStorage and transporttemperatureProtective capFlanges