Vega VEGAFLEX 81 Operating Instructions Manual

Also see for VEGAFLEX 81: Mounting instructions Operating instructions Quick setup guide Operating instructions Operating instructions

Contents

Vega VEGAFLEX 81 Operating Instructions Manual Manual pdf 38 page image

386 Set up with the display and adjustment moduleVEGAFLEX 81 • 4 … 20 mA/HART two-wire41824-EN-130612The instrument carries out an automatic false signal suppressionas soon as the probe is uncovered. The false signal suppression isalways updated.6.4 Parameter adjustment - Extended adjustmentFor technically demanding measurement loops you can carry outextended settings in "Extended adjustment".The main menu is divided into five sections with the following func-tions:Setup: Settings, e.g. measurement loop name, medium, vessel,adjustment, signal output, device unit, false signal suppression,linearization curveDisplay: Settings, e.g., for language, measured value display, lightingDiagnosis: Information, e.g. on instrument status, pointer, measure-ment reliability, simulation, echo curveAdditional adjustments: Reset, date/time, reset, copy functionInfo: Instrument name, hardware and software version, date of manu-facture, instrument featuresNote:For optimum adjustment of the measurement, the individual submenuitems in the main menu item "Setup" should be selected one afterthe other and provided with the correct parameters. If possible, gothrough the items in the given sequence.The procedure is described below.The following submenu points are available:The submenu points described below.Here you can assign a suitable measurement loop name. Push the"OK" key to start the processing. With the "+" key you change the signand with the "->" key you jump to the next position.You can enter names with max. 19 characters. The character setcomprises:• Capital letters from A … Z• Numbers from 0 … 9Main menuSetup - Measurementloop name