Vega VEGAFLEX 82 Quick Setup Manual

Also see for VEGAFLEX 82: Safety manual Supplementary instructions Quick setup guide Operating instructions Operating instructions

Contents

Vega VEGAFLEX 82 Quick Setup Manual Manual pdf 14 page image

145 Set up with the display and adjustment moduleVEGAFLEX 82 • Modbus57769-EN-1810305 Set up with the display and adjustmentmodule5.1 Insert display and adjustment moduleThe display and adjustment module can be inserted into the sensorand removed again at any time. You can choose any one of four differ-ent positions - each displaced by 90°. It is not necessary to interruptthe power supply.Proceed as follows:1. Unscrew the housing lid2. Place the display and adjustment module on the electronics in thedesired position and turn it to the right until it snaps in.3. Screw housing lid with inspection window tightly back onDisassembly is carried out in reverse order.The display and adjustment module is powered by the sensor, an ad-ditional connection is not necessary.Fig. 10: Installing the display and adjustment module in the electronics compart-ment of the single chamber housingNote:If you intend to retrofit the instrument with a display and adjustmentmodule for continuous measured value indication, a higher lid with aninspection glass is required.5.2 Parameter adjustment - Quick setupTo quickly and easily adapt the sensor to the application, selectthe menu item "Quick setup" in the start graphic on the display andadjustment module.You can find "Extended adjustment" in the detailed operatinginstructions.Quick setup