Vega VEGAFLEX 86 Operating Instructions Manual

Also see for VEGAFLEX 86: Operating instructions Operating instructions Safety manual Operating instructions Supplementary instructions

Contents

Vega VEGAFLEX 86 Operating Instructions Manual Manual pdf 33 page image

336 Set up with the display and adjustment moduleVEGAFLEX 86 • Profibus PA44232-EN-1605186 Set up with the display and adjustmentmodule6.1 Insert display and adjustment moduleThe display and adjustment module can be inserted into the sensorand removed again at any time. You can choose any one of four differ-ent positions - each displaced by 90°. It is not necessary to interruptthe power supply.Proceed as follows:1. Unscrew the housing lid2. Place the display and adjustment module on the electronics in thedesired position and turn it to the right until it snaps in.3. Screw housing lid with inspection window tightly back onDisassembly is carried out in reverse order.The display and adjustment module is powered by the sensor, an ad-ditional connection is not necessary.Fig. 25: Installing the display and adjustment module in the electronics compart-ment of the single chamber housing

/ 100

Related manuals for Vega VEGAFLEX 86

Vega VEGAFLEX 86 Operating Instructions Manual

This manual is suitable for:

VEGAFLEX 86

manualsdatabase

Your AI-powered manual search engine