Vega VEGAFLEX 86 Operating Instructions Manual
Also see for VEGAFLEX 86: Operating instructionsOperating instructionsSafety manualOperating instructionsSupplementary instructions
                                                                                                    | |
Contents
| 
113 Product descriptionVEGAFLEX 86 • 4 … 20 mA/HART - two-wire49477-EN-150102The instrument is always preset to the application "Level measure-ment".For the interface measurement, you can select the requested outputsignal with the setup.3.3 Packaging, transport and storageYour instrument was protected by packaging during transport. Itscapacity to handle normal loads during transport is assured by a testbased on ISO 4180.The packaging of standard instruments consists of environment-friendly, recyclable cardboard. For special versions, PE foam or PEfoil is also used. Dispose of the packaging material via specialisedrecycling companies.Transport must be carried out in due consideration of the notes on thetransport packaging. Nonobservance of these instructions can causedamage to the device.The delivery must be checked for completeness and possible transitdamage immediately at receipt. Ascertained transit damage or con-cealed defects must be appropriately dealt with.Up to the time of installation, the packages must be left closed andstored according to the orientation and storage markings on theoutside.Unless otherwise indicated, the packages must be stored only underthe following conditions:• Not in the open• Dry and dust free• Not exposed to corrosive media• Protected against solar radiation• Avoiding mechanical shock and vibration• Storage and transport temperature see chapter "Supplement -Technical data - Ambient conditions"• Relative humidity 20 … 85 %3.4 Accessories and replacement partsThe display and adjustment module PLICSCOM is used for measuredvalue indication, adjustment and diagnosis. It can be inserted into thesensor or the external display and adjustment unit and removed atany time.You can find further information in the operating instructions "Displayand adjustment module PLICSCOM" (Document-ID 27835).The interface adapter VEGACONNECT enables the connection ofcommunication-capable instruments to the USB interface of a PC. Forparameter adjustment of these instruments, the adjustment softwarePACTware with VEGA-DTM is required.Output signalPackagingTransportTransport inspectionStorageStorage and transporttemperaturePLICSCOMVEGACONNECT |
Related manuals for Vega VEGAFLEX 86
Vega VEGAFLEX 86 Operating Instructions Manual
Vega VEGAFLEX 86 Operating Instructions Manual
Vega VEGAFLEX 86 Operating Instructions Manual
Vega VEGAFLEX 86 Operating Instructions Manual
Vega VEGAFLEX 86 Operating Instructions Manual
Vega VEGAFLEX 86 Operating Instructions Manual
Vega VEGAFLEX 86 Operating Instructions Manual
Vega VEGAFLEX 86 Operating Instructions Manual
Vega VEGAFLEX 86 Operating Instructions Manual
Vega VEGAFLEX 86 Operating Instructions Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine