7.2 Parameter adjustment with PACTwareAs an alternative to the integrated indicating and adjustment unit, theadjustment can be also carried out via a Windows PC. For this, theconfiguration software PACTware and a suitable instrument driver(DTM) according to the FDT standard are required. The actualPACTware version as well as all available DTMs are compiled in aDTM Collection. Furthermore, the DTMs can be integrated into otherframe applications according to the FDT standard.Note:To ensure that all instrument functions are supported, you shouldalways use the latest DTM Collection. Furthermore, not all describedfunctions are included in older firmware versions. The latest instrumentsoftware can be also downloaded from our homepage. A description ofthe update procedure is also available in the Internet.Further setup steps are described in the operating instructions manual"DTM Collection/PACTware" attached to each DTM Collection andwhich can also be downloaded from the Internet. A detaileddescription is available in the online help of PACTware and the DTMsas well as in the supplementary instructions manual "RS232/Ethernetconnection".When connecting via Ethernet, VEGAMET 624 must be provided witha suitable IP address and subnet mask. If the project setup is carriedout without assistant (online mode), IP address and subnet mask mustbe entered additionally in the DTM. Click in the project window with theright mouse key to the Ethernet DTM and choose "Add. functions -Modify DTM addresses".All device DTMs are available as a free-of-charge standard versionand as a full version that must be purchased. In the standard version,all functions for complete setup are already included. An assistent forsimple project configuration simplifies the adjustment considerably.Saving/printing the project as well as import/export functions are alsopart of the standard version.In the full version there is also an extended print function for completeproject documentation as well as a save function for measured valueand echo curves. In addition, there is a tank calculation program aswell as a multiviewer for display and analysis of the saved measuredvalue and echo curves.7.3 Setup web server/e-mail, remote enquirySetup and application examples of the web server, the e-mail functionsand the visualisation WEB-VV are specified in the supplementaryinstructions "RS232/Ethernet connection".PrerequisitesConnection via EthernetStandard/Full version34 VEGAMET 624 • 4 … 20 mA/HART signal conditioning instrument7 Setup with PACTware28969-EN-091116