366 Set up with the display and adjustment moduleVEGAPULS 61 • Foundation Fieldbus41716-EN-181220In the first view, the selected measured value is displayed in largedigits.In the second view, the selected measured value and a correspond-ing bar graph presentation are displayed.In the third view, the selected measured value as well as a second se-lectable value, e.g. the temperature of the electronics, are displayed.During the initial setup of an instrument shipped with factory settings,use the "OK" key to get to the menu "National language".This menu item is used to select the national language for further pa-rameter adjustment. You can change the selection via the menu item"Setup - Display, Menu language".With the "OK" key you move to the main menu.6.4 Parameter adjustmentThe instrument is adapted to the application conditions via the pa-rameter adjustment. The parameter adjustment is carried out with anadjustment menu.The main menu is divided into five sections with the following func-tions:Setup: Settings, for example, for medium, application, vessel, adjust-ment, dampingDisplay: Language setting, settings for the measured value indicationas well as lightingDiagnosis: Information, e.g. on instrument status, pointer, measure-ment reliability, simulation, echo curveFurther settings: e.g. instrument units, unit SV 2, false signal sup-pression, linearization, date/time, reset, copy sensor dataInfo: Instrument name, hardware and software version, date of manu-facture, device ID, instrument featuresIn the main menu item "Setup", the individual submenu itemsshould be selected one after the other and provided with the correctparameters to ensure optimum adjustment of the measurement. Theprocedure is described in the following.Selection of nationallanguageMain menu