l Current sensor software as fileCaution:Keep in mind that a software update can lead to expiry of theapprovals. You can find detailed information on our homepage www.vega.com.At "www.vega.com/downloads" go to "Software". Select under "plicssensors and instruments" the respective instrument series andsoftware version. Load the zip file via the right mouse key with "Savetarget as" e.g. on the desktop of your PC. Extract all files available inthe zip file, e.g. to the desktop.Connect the sensor to power supply and provide connection from thePC to the instrument via the interface adapter. Start PACTware andmove via the menu Project to the VEGA project assistant. Select"USB" and "Set instruments online". Provide connection to the sensorvia "Start" until the message "Search complete" is displayed.Move in the PACTware menu bar to "Instrument data", "Additionalfunctions" and "Software update". PACTware now checks the actualhardware and software version of the sensor and displays the data.This process takes approx. 60 s.Push the button "Update software" and select the previously extractedXML file. Then the software update can be started. The additional filesare installed automatically. Depending on the sensor, this procedurelasts approximately 15 min.9.7 How to proceed in case of repairIf a repair is necessary, please proceed as follows:You can download a return form (23 KB) from our Internet homepagewww.vega.com under: "Downloads - Forms and certificates - Repairform".By doing this you help us carry out the repair quickly and withouthaving to call back for needed information.l Print and fill out one form per instrumentl Clean the instrument and pack it damage-proofl Attach the completed form and, if need be, also a safety datasheet outside on the packagingl Please ask the agency serving you for the address of your returnshipment. You can find the competent agency on our websitewww.vega.com.Load sensor software toPCPrepare updateLoad software into sen-sor52 VEGAPULS 62 • 4 … 20 mA/HART two-wire9 Diagnosis and service36503-EN-100607