Vega VEGAPULS 69 Operating Instructions Manual

Also see for VEGAPULS 69: Operating instructions Mounting instructions Product information Quick setup guide Operating instructions

Contents

406 Set up with the display and adjustment moduleVEGAPULS 69 • Foundation Fieldbus47251-EN-180627In the first view, the selected measured value is displayed in largedigits.In the second view, the selected measured value and a correspond-ing bar graph presentation are displayed.In the third view, the selected measured value as well as a second se-lectable value, e.g. the temperature of the electronics, are displayed.During the initial setup of an instrument shipped with factory settings,use the "OK" key to get to the menu "National language".This menu item is used to select the national language for further pa-rameter adjustment. You can change the selection via the menu item"Setup - Display, Menu language".With the "OK" key you move to the main menu.6.4 Parameter adjustment - Quick setupTo quickly and easily adapt the sensor to the application, selectthe menu item "Quick setup" in the start graphic on the display andadjustment module.Select the individual steps with the [->] key.After the last step, "Quick setup terminated successfully" is displayedbriefly.Information:The echo curve of setup is stored automatically during the quicksetup.The return to the measured value indication is carried out through the[->] or [ESC] keys or automatically after 3 sYou can find "Extended adjustment" in the next sub-chapter.6.5 Parameter adjustmentThe instrument is adapted to the application conditions via the pa-rameter adjustment. The parameter adjustment is carried out with anadjustment menu.The main menu is divided into five sections with the following func-tions:Selection of nationallanguageMain menu