Vega VEGAPULS SR 68 Quick Setup Manual

Also see for VEGAPULS SR 68: Quick setup guide Product information Operating instructions Operating instructions Operating instructions

Contents

185 Set up the sensor with the display and adjustment moduleVEGAPULS SR 68 • Modbus and Levelmaster protocol47164-EN-180226Note:Check the distance to the product surface, because if an incorrect(too large) value is entered, the existing level will be saved as a falsesignal. The level would then no longer be detectable in this area.If a false signal suppression has already been saved in the sensor,the following menu window appears when selecting "False signalsuppression":Delete: An already created false signal suppression will be com-pletely deleted. This is useful if the saved false signal suppression nolonger matches the metrological conditions in the vessel.Extend: is used to extend an already created false signal suppres-sion. This is useful if a false signal suppression was carried out withtoo high a level and not all false signals could be detected. Whenselecting "Extend", the distance to the product surface of the createdfalse signal suppression is displayed. This value can now be changedand the false signal suppression can be extended to this range.5.3 Menu overviewMenu item Parameter Default settingMeasurementloop nameSensorApplication Application levelUnits Unit of measure-mentmbar (with nominal measuring range≤ 400 mbar)bar (with nominal measuring ranges≥ 1 bar)Temperature unit °CPosition correc-tion0.00 barAdjustment Zero/Min. adjust-ment0.00 bar0.00 %Span/Max. adjust-mentNominal measuring range in bar100.00 %Damping Integration time 1.0 sLinearization Characteristics LinearSetup