62 For your safetyVEGASWING 63 • Two-wire 8/16 mA29232-EN-180704reasons, only the accessory specified by the manufacturer must beused.To avoid any danger, the safety approval markings and safety tips onthe device must also be observed and their meaning read in this oper-ating instructions manual.2.5 Safety label on the instrumentThe safety approval markings and safety tips on the device must beobserved.2.6 EU conformityThe device fulfils the legal requirements of the applicable EU direc-tives. By affixing the CE marking, we confirm the conformity of theinstrument with these directives.You can find the EU conformity declaration on our website underwww.vega.com/downloads.2.7 SIL conformityVEGASWING 63 fulfills the requirements of functional safety accord-ing to IEC 61508 resp. IEC 61511. You can find further information inthe Safety Manual "VEGASWING series 60".2.8 Installation and operation in the USA andCanadaThis information is only valid for USA and Canada. Hence the follow-ing text is only available in the English language.Installations in the US shall comply with the relevant requirements ofthe National Electrical Code (ANSI/NFPA 70).Installations in Canada shall comply with the relevant requirements ofthe Canadian Electrical Code.2.9 Safety instructions for Ex areasPlease note the Ex-specific safety information for installation and op-eration in Ex areas. These safety instructions are part of the operatinginstructions manual and come with the Ex-approved instruments.2.10 Environmental instructionsProtection of the environment is one of our most important duties.That is why we have introduced an environment management systemwith the goal of continuously improving company environmental pro-tection. The environment management system is certified accordingto DIN EN ISO 14001.Please help us fulfil this obligation by observing the environmentalinstructions in this manual:• Chapter "Packaging, transport and storage"• Chapter "Disposal"