WÄRTSILÄ JOVYSTAR HP 200 kVA Operating Manual

WÄRTSILÄ JOVYSTAR HP 200 kVA Operating Manual Manual pdf 4 page image

Wärtsilä JOVYSTAR HP 200-800kVA BAX 4640 E - 4 -Table of contents1 Technical Data 61.1 Autonomy Times, Dimensions And Weights 82 General Notes 92.1 Introduction 92.2 Why Using A UPS? 93 System description 113.1 Rectifier 123.2 Inverter 123.3 Battery and Battery Charger 123.4 Static Bypass 123.5 Manual Bypass 123.6 Front Panel 123.7 Operating status 133.7.1 Normal operation 133.7.2 Load supplied by bypass due to inverter fault 133.7.3 Rectifier failure or mains failure 133.7.4 Internal Manual bypass 144 Installation 154.1 Reception of the UPS 154.2 Transport 154.3 Setting up 164.3.1 Dimensions Wärtsilä JOVYSTAR HP 200-300 kVA 174.3.2 Dimensions Wärtsilä JOVYSTAR HP 400 kVA 194.3.3 Dimensions Wärtsilä JOVYSTAR HP 500-600 kVA 214.3.4 Dimensions Wärtsilä JOVYSTAR HP 800 kVA 234.4 Electrical Connections 264.4.1 Terminal Board 274.4.2 Internal Connections between both switch cabinets: 304.4.3 Battery connection 315 Operation 325.1 Setting Up 325.1.1 Start-up troubleshooting 325.2 Shut down procedure 335.3 Starting the Parallel Redundant System 335.4 Switch Off the Parallel Redundant System 335.5 Manual bypass procedure 335.5.1 Start-up from manual bypass (Single UPS) 345.5.2 Initiation of the Manual Bypass in Parallel Redundant Operation 355.5.3 Switch Off the Manual Bypass in Parallel Redundant Operation 355.6 Front Panel 355.6.1 Mimic description 355.7 Menu structure 375.7.1 Measures 375.7.2 Alarms 395.7.3 Special 405.7.4 Info 436 Options 466.1 Parallel redundant system 466.1.1 Additional hardware 466.1.2 System layouts 466.2 Battery symmetry monitoring 466.3 Relay PCB 476.4 SNMP-Adaptor 476.5 Shut-down software 48