WAGNER AquaCoat AirCoat GM 5000EACW Operating Manual

Contents

9AquaCoat GM 5000EACWOPERATING MANUALEDITION 04/2012 PART NO. DOC23213622.2.4 CLEANING2.2.5 HANDLING HAZARDOUS LIQUIDS, VARNISHES AND PAINTS2.2.6 TOUCHING HOT SURFACES2.3 CORRECT USE $E ENERGIZETHEUNITELECTRICALLY $ISCONNECTTHEPNEUMATICSUPPLYLINE 2ELIEVETHEPRESSUREFROMTHEUNIT %NSURETHATONLYNON COMBUSTIBLEDETERGENTSAREUSED 4O CLEAN USE ONLY CLOTHS AND BRUSHES .EVER USE HARD OBJECTS OR SPRAY ON CLEANINGAGENTSAGUNWhen preparing or working with paint and when cleaning the unit, follow the workinginstructions of the manufacturer of the paints, solvents and cleaning agents beingused.Take the specified protective measures, in particular wear safety goggles, protectiveclothing and gloves, as well as hand protection cream if necessary.Use a mask or breathing apparatus if necessary.For sufficient health and environmental safety: Operate the unit in a spray booth or ona spraying wall with the ventilation (extraction) switched on.Wear suitable protective clothing when working with hot materials.➞ Touch hot surfaces only if you are wearing protective gloves.➞ When operating the unit with a coating material with a temperature of > 43 °C; 109.4 °F:- Identify the unit with a warning label that says „Warning - hot surface“.Order No.9998910 Information label9998911 Safety label2.4 SAFETY-RELEVANT INFORMATION ABOUT DISCHARGES7!'.%2ACCEPTSNOLIABILITYFORANYDAMAGEARISINGFROMINCORRECTUSE 5SETHEUNITONLYTOWORKWITHTHEMATERIALSRECOMMENDEDBY7!'.%2 /PERATETHEUNITONLYASANENTIREUNIT $ONOTDEACTIVATESAFETYEQUIPMENT 5SEONLY7!'.%2ORIGINALSPAREPARTSANDACCESSORIES4HE PLASTIC PARTS OF THE CABINET ARE CHARGED ELECTROSTATICALLY BY THE HIGH VOLTAGE lELD(ARMLESSDISCHARGESBRUSHDISCHARGES AREPOSSIBLEAFTERCONTACTWITHPLASTICPARTS4HEYARECOMPLETELYHARMLESSFORPEOPLE