WAGNER GM 1-350 Operating Manual

Also see for PROTEC GM 1-350: Translation of the original operating manual

11GM 1-350/530ADBCEFGB_5042ADBCEFGBB_5302EOPERATING MANUALVERSION 02/2015 ORDER NUMBER DOC23493695 DESCRIPTIONDesignation DesignationA Preload nut E Nozzle holderB Trigger locking device F Reversible nozzle (not included in scope of delivery)C Product connection with swivel joint G Gun housingD Trigger5.1 DESIGN5.2 DEVICE TYPEAirless manual gun for manually coating work pieces.5.3 TYPE OF USEThe spray gun is intended for atomizing liquid coating products under pressure (airless process).A high-pressure pump sucks in the coating product and conveys it under pressure to the nozzle in the spraygun. The coating product atomizes as it is pressed through the nozzle at high pressure. The product valveopens if the trigger (D) is operated with the locking device (B) released. The spray profile changes dependingon the nozzle selection.5.4 MODE OF OPERATIONSecure the spray gun with the locking device (B).The nozzle holder (E) has an anti-contact guard.5.5 PROTECTIVE AND MONITORING EQUIPMENTThis Airless manual gun is available in two different variants (350 bar, 530 bar). The choice of nozzle dependson the application, therefore these components are not included in the scope of delivery. A selection guide forgun accessories can be found in Chapter 12.5.6 SCOPE OF DELIVERYOrder No. Designation Field of application1 2349286 GM 1-350 35 MPa; 350 bar; 5076 psi, NPSM1/4" product connection, finishing1 2349287 GM 1-530 53 MPa; 530 bar; 7687 psi, NPSM1/4" product connection, protective coating