WAGNER GM 5000EA Translation Of The Original Operating Manual

Also see for GM 5000EA: Operating manual Operating manual

Contents

WAGNER GM 5000EA Translation Of The Original Operating Manual Manual pdf 13 page image

13GM 5000EAOPERATING MANUALEDITION 07/2014 ORDER NUMBER DOC 23444994 GENERAL SAFETY INSTRUCTIONS4.1 SAFETY INSTRUCTIONS FOR THE OPERATOR4.1.1 ELECTRICAL EQUIPMENT4.1.2 STAFF QUALIFICATIONS4.1.3 SAFE WORK ENVIRONMENT4.2 SAFETY INSTRUCTIONS FOR STAFFKeep this operating manual at hand near the unit at all times.Always follow local regulations concerning occupational safety and accidentprevention.Electrical devices and equipmentTo be provided in accordance with the local safety requirements with regard to theoperating mode and ambient influences.May only be maintained by skilled electricians or under their supervision.Must be operated in accordance with the safety regulations and electrotechnicalregulations.Must be repaired immediately in the event of problems.Must be decommissioned if they pose a hazard.Must be de-energized before work is commenced on active parts. Inform staff aboutplanned work. Observe electrical safety regulations.Ensure that the device is operated and repaired only by trained persons.Ensure that the floor in the working area is static dissipative in accordance withEN 61340-4-1 (resistance must not exceed 100 Mohm).Ensure that all persons within the working area wear static dissipative shoes. Footwearmust comply with EN 20344. The measured insulation resistance must not exceed100 Mohm.Ensure that during spraying, persons wear static dissipative gloves. The groundingtakes place via the spray gun handle.If protective clothing is worn, including gloves, it has to comply with EN 1149-5. Themeasured insulation resistance may not exceed 100 Mohm.Paint mist extraction systems must be fitted on site according to local regulations.Ensure that the following components of a safe working environment are available:– Product/air hoses adapted to the working pressure.– Personal safety equipment (breathing and skin protection).Ensure that there are no ignition sources such as naked flames, sparks, glowing wires,or hot surfaces in the vicinity. Do not smoke.Always follow the information in this manual, particularly the general safety instructionsand the warning instructions.Always follow local regulations concerning occupational safety and accident prevention.