19150 cm 3 - 300 cm 3B_042631098753214116OPERATING MANUALVERSION 05/2015 ORDER NUMBER DOC2340282The piston pump is driven with compressed air (2). This compressed air moves the airpiston up and down in the air motor (4) and it also moves the associated pump piston upand down in the fl uid section (9).In the control housing (1), the air pressure is redirected at the end of each stroke with thehelp of the reversing valve. The working material is sucked up during the upwards strokeand is continuously conveyed towards the product outlet (8) in both stroke directions.Air motor (4)The air motor with its pneumatic reverse (1) does not require pneumatic oil.The compressed air is fed to the motor via the air regulator (2) and the ball valve (3).Fluid section (9)The fluid section has been designed as a piston pump with exchangeable ball valves. Thehard chrome-plated pump piston runs in two fixed packings which are self-adjusting bymeans of a pressure spring, thus resulting in a long service life.Between the air motor and the fluid section there is a separating agent cup (7) for separatingthe separating agent.1 Control housing with integrated silencer2 Air pressure regulator3 Ball Valve4 Air motor5 Compressed air Inlet6 Mounting flange7 Separating agent cup8 Material outlet9 Fluid section10 Material inlet11 Grounding connection5 DESCRIPTION5.1 DESIGN5.2 MODE OF OPERATION
