WAGNER ProSpray 3.21 Original Operating Manual

Also see for ProSpray 3.21: Owner's manual Owner's manual Operating manual Operating manual Operating manual

ProSpray 3.29 • 3.31 11GB Starting operationVolume Pumped ScreenVOLUME PUMPEDSELECT-4MENU-1The Volume Pumped screen shows thetotal number of gallons or liters sprayed bythe sprayer.GALLONS XMENU-1LITRES XMENU-1LITRES-2GALLONS-2To select the Volume Pumped screen, pressthe #4 key.job Volume ScreenJOB VOLUMESELECT-4MENU-1The Job Volume screen allows the userto reset a liter counter to track usage onspecific jobs.GALLONS XXXXRESET-3MENU-1To select the Job Volume screen, press the#4 key.unit Serial # ScreenUNIT SERIAL #SELECT-4MENU-1The Unit Serial # screen shows the sprayersserial number.SER # XXXXXXXXXXMENU-1To select the Unit Serial # screen, press the#4 key.Timers ScreenTIMERSSELECT-4MENU-1The Timers screen shows the total time thesprayer has been turned on as well as thetotal time the sprayer has been running (pumping).ON TIMERUN TIME XXXXXXXXTo select the Timers screen, press the #4key.Job Timers ScreenJOB TIMERSSELECT-4MENU-1The Job Timers screen allows the user toreset the “ON TIME” and “RUN TIME” totrack time on specific jobs.JOB ON XRESET-3MENU-1JOB RUN XRESET-3MENU-1To select the Job Timers screen, press the#4 key. “JOB ON” screen will appear. Press#3 to reset. Press #1 to continue to “JOBRUN” screen. Press #3 to reset. Press #1to scroll through the remaining menuscreens.Service Time ScreenSERVICE TIMESELECT-4MENU-1The Service Time screen allows the user toset a service time interval (in hours). Belowthe set time, the screens shows the current amount of hours on thesprayer since the last activation of the service timer. To select theService Timer screen, press the #4 key.SERVICE @ XXRUN HOURS XXTo set the service time, press the #2 (up)and/or the #3 (down) keys to the desiredtime (run hours will increase/decrease in increments of 25 for eachtime you press a key).When the service time interval is set and met by the run hours, thedisplay will show a “Service Required” screen. The pump will remainfunctional. To return to the Main Screen, press the #1 key. Doing sowill reset the “Service @” and “Run Hours” displayed on the ServiceScreen back to 0.Security Code ScreenSECURITY CODECHANGE-2MENU-1The Security Code screen allows the userto set a four digit security code to preventunauthorized use of the sprayer. If a security code has been set, thecontrol system display will ask for the code at startup. If the correctcode is entered, the display will show the Main Screen and thesprayer will operate. If the wrong code is entered, the display willcontinue to ask for the correct code and the sprayer will be disabled.To set or change the security code, press the #2 key.i If the sprayer is new, no security code is set and theMain Screen will appear at startup. When setting asecurity code for the first time, the “Enter old codeNumber” screen will appear, and you will need toenter “1111”.ENTER OLD CODENUMBEREnter the old security code number toaccess the screen that allows the codechange. If the wrong code is entered, the display will continue to askfor the correct code and the security code cannot be changed.ENTER NEW CODENUMBER XXXXRE-ENTER NEWNUMBER XXXXNEW CODE NUMBERACCEPTEDEnter the new security code. Once thenew code is entered, the display willautomatically ask that the new code bere-entered for verification. If the same newcode is re-entered, the display will confirmthat the new code has been accepted andreturn to the Main Screen. If the new codeis re-entered incorrectly, the display will return to the “Enter NewCode Number” screen and the process will repeat.If you forget or misplace your security code, you can contact Wagnercustomer service for assistance.i to inactivate the security function, enter “1111” atthe “Enter new code number” screen (this is thedefault code that leaves the sprayer unlocked). As aresult, the Main Screen will appear at sprayer startup.Prime ScreenPRIMEThe Prime screen appears when thepressure control knob is set at the “MIN”setting.Rapid Clean ScreenRAPID CLEANThe Rapid Clean screen appears when thepressure control knob is set at the RAPIDCLEAN position and the PRIME/SPRAY valve is in the PRIME position.i If there is no action at any menu screen for 30seconds, the display will go back to the Main Screen.