WAGNER Wildcat 18-40 Translation Of The Original Operating Manual

Also see for Jaguar 75-150: Operating manual Translation of the original operation manual Service manual

Contents

WAGNER Wildcat 18-40 Translation Of The Original Operating Manual Manual pdf 45 page image

45VERSION 08/2018 ORDER NUMBER DOC 2333538IceBreaker 40-150 cm38.2.6 CLEANING AND REPLACING THE FILTER8.2.6.1 STRAIGHT INLINE FILTER1. Flush the pump and inline filter in accordance withChapter 7.5. Flush using the spray gun so that theflushing agent flows through the inline filter. Maximizethe flow (remove the nozzle, open the dosing valve ifnecessary).B_052742351**Flow direction27 MPa; 270 bar; 3916 psi2. Empty the pump in a controlled manner in accordancewith Chapter 8.2.4.3. Place the grounded collection tank under the inlinefilter.4. If no swivel joint is mounted, remove the hose.5. Unscrew the inlet housing (2) and outlet housing (5)with two size 19 wrenches.6. Remove the filter insert (3).7. If the inline filter has any leaks, replace the seal* (1).8. Insert the new filter insert* (3). Note the installation position: closed end in directionof flow.9. If necessary, coat the thread with anti-seize paste**.10. Screw together the inlet housing (2) and outlet housing (5) with two size 19 wrenches.11. If necessary, screw the hose back on.12. Fill the pump in accordance with Chapter 8.2.5.* Order no., see Chapter 13.** Order no., see Chapter 10.5.8.2.6.2 ANGLED INLINE FILTER1. Flush the pump and inline filter in accordance withChapter 7.5. Flush using the spray gun so that theflushing agent flows through the inline filter. Maximizethe flow (remove the nozzle, open the dosing valve ifnecessary).B_0527341**235Flow direction53 MPa; 530 bar; 7687 psi2. Empty the pump in a controlled manner in accordancewith Chapter 8.2.4.3. Place the grounded collection tank under the inlinefilter.4. Unscrew the filter by turning the handle (4).5. Remove the filter insert (3).6. If the inline filter has any leaks, replace the seal* (1).7. Insert the new filter insert* (3). Note the installationposition: closed end in direction of flow.8. If necessary, coat the thread with anti-seize paste**.9. Assemble the turning handle (4), inlet housing (2) and outlet housing (5) and tightenby turning the handle.10. Fill the pump in accordance with Chapter 8.2.5.* Order no., see Chapter 13.** Order no., see Chapter 10.5.