WAGO 750-606/040-000 Manual

WAGO I/O SYSTEM 750 XTR Connect Devices 41750-606/040-000 Power Supply 24 VDC XTR for Ex i XTR ModulesManualVersion 2.0.06.2 Power Supply ConceptKeep the air and creep distances between intrinsically safe segments!The maximum current available from the 750-606/040-000 “Power Supply24 VDC Diagn for Ex i XTR Modules” is 1 A.If the use of further 750-606/040-000 is necessary for reasons of extent ofutilization, 4 Separation Modules (750-616/040-000) must be used to guaranteethe distance between the intrinsically safe segments.Do not exceed maximum current via power contacts!The maximum current available from the “Power Supply 24 VDC Diagn for Ex iXTR Modules” 750-606/040-000 is 1 A. Greater currents can damage the powercontacts. When configuring the system, ensure that this current is not exceeded.If exceeded, an additional 750-606/040-000 must be used.Further information about explosion prevention!Further information about explosion prevention can be found in section “Use inHazardous Environments”!The power supply module 750-606/040-000 (Power Supply 24 VDC XTR for Ex iXTR Modules) is powered via the CAGE CLAMP® connection from an XTR filtermodule. The power jumper contacts designed as spring contacts provides a safevoltage of 24 VDC to the following I/O modules.