WAGO 750-637/040-001 Manual
                                                      |
WAGO-I/O-SYSTEM 750 XTR Process Image 35750-637/040-001 Inc. Encoder 24 VDC Diff 32Bit XTRManualVersion 1.1.0Table 28: Control byte C1Control Byte C1Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 00 Enable Ref SetCam2SetCam1DisCam2DisCam1MapPZD MapPZDMapPZD Coding of Process DataMapPZD Coding of Process DataDisCam1Inhibit Cam Output 10: Cam output 1 enabled.1: Cam output 1 inhibited.DisCam2Inhibit Cam Output 20: Cam output 2 enabled.1: Cam output 2 inhibited.SetCam1Apply Cam Output 1Positive edge: Set value applied as lower comparison value N1_LO forcam output 1 (N1).Negative edge Set value applied as the upper comparison value N1_HIfor cam output 1 (N1).SetCam2Apply Cam Output 2Positive edge: Set value applied as lower comparison value N2_LO forcam output 2 (N2).Negative edge Set value applied as the upper comparison value N2_HIfor cam output 2 (N2).EnableRefEnable REF InputThe control system sets the EnableRef bitThe control system must enable EN_LATC (C0.0) orEN_LAT_EXT (C0.1) with a positive edgeA positive edge is generated at input REFAfter this, the next positive edge at input C or LATCHwill result in a capture or preload event0 Reserved |
Related manuals for WAGO 750-637/040-001
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine