WAGO I/O-SYSTEM 750 Manual

Also see for I/O-SYSTEM 750: Manual Manual Technical description User's installation and configuration Manual

Contents

WAGO I/O-SYSTEM 750 Manual Manual pdf 5 page image

WAGO I/O-SYSTEM 750 Notes about this Documentation 5753-454 2AI 4-20mA Diff.ManualVersion 1.1.01 Notes about this DocumentationAlways retain this documentation!This documentation is part of the product. Therefore, retain the documentationduring the entire service life of the product. Pass on the documentation to anysubsequent user. In addition, ensure that any supplement to this documentation isincluded, if necessary.1.1 Validity of this DocumentationThis documentation is only applicable to the I/O module 753-454(2AI 4-20mA Diff.).The I/O module 753-454 shall only be installed and operated according to theinstructions in this manual and in the manual for the used fieldbuscoupler/controller.Consider power layout of the WAGO-I/O-SYSTEM 750!In addition to these operating instructions, you will also need the manual for theused fieldbus coupler/controller, which can be downloaded at www.wago.com.There, you can obtain important information including information on electricalisolation, system power and supply specifications.1.2 CopyrightThis Manual, including all figures and illustrations, is copyright-protected. Anyfurther use of this Manual by third parties that violate pertinent copyrightprovisions is prohibited. Reproduction, translation, electronic and phototechnicalfiling/archiving (e.g., photocopying) as well as any amendments require thewritten consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany.Non-observance will involve the right to assert damage claims.