WAGO I/O System 750 Series Manual

Also see for I/O System 750 Series: Manual Manual Manual Manual

Contents

56 • Fieldbus CouplerFieldbus Coupler 750-346WAGO-I/O-SYSTEM 750DeviceNet2. Create a New Project1. Enter the "File" menu and click on menu point "New".2. Select "DeviceNet" as the fieldbus system and confirm your selection byclicking on the "OK" button.Fig. 3-13: Select fieldbus p112501d3. Enter Master1. Enter a fieldbus master on the surface by clicking on the „Master“ menupoint in the "Insert" menu.A dialog window opens in which you can select the DeviceNet fieldbus cardin your PC.Fig. 3-14: Select the DeviceNet fieldbus PCB / Insert Master p112502d2. For the DeviceNet Master interface card, click in the left-hand selectionwindow on the corresponding entry to mark it.3. Take the Master into the right-hand window by clicking on the "Add" but-ton and confirm by clicking on the "OK" button.Now the fieldbus master is shown on the surface as a graphic.