Components and installation21.11.2015 16 / 76 Z20469Copyright 2013 by: WATERKOTTE GmbH. Subject to changes.4.3.5 Electronic heat pump controlThe heat pump control (control panel is pictured) is included in the delivery scopeof the WATERKOTTE heat pump.Use in other than WATERKOTTE heat pumps will void any warranty claim.The control is used to control and monitor heating systems that are operated withWATERKOTTE compact heat pumps according to technical guidelines ofWATERKOTTE Wärmepumpen GmbH.The following tasks are performed: everything to do with regulation (depending onthe external temperature with pilot room guidance), control, monitoring, self-diagnosis, saving of data in cases of breakdown.WATERKOTTE explicitly states that function warranty will become void if used onsystems not approved by WATERKOTTE. Any liability for consequential damagesdue to incorrect function within these systems shall be explicitly excluded.Info: Technical details, operation and warning messages (seeOperating manualfor Heat pump control).4.3.6 SensorsThe control's sensor system consists of: Pressure transmitter for evaporation andcondensation pressure, sensors for temperature detection in all circuits, externalwall sensor in accessories kit, pilot room sensor and hot water sensor (optional).4.3.7 COP counterA WATERKOTTE COP counter is already integrated in the heat pump control. Foradditional information, please refer toOperating manual for Heat pump control.4.3.8 OptionsMixer accessories: sensor, additional control module.Expansion kit: for pool heating, thermal use of solar energy, mixer circuits.Pool accessories: sensor, 3-way-valve, additional control module.Buffer tank: standard tank.Heat source accessories: heat exchanger for ground water, flow rate monitoring,antifreeze concentrate, heat source distributor.Solar accessories: sensor, additional control module, heat exchanger, solar collec-tors.Heating: underfloor heating system, underfloor heating head station, distributioncabinet, convectors.Heat pump accessories: Digital soft starter (for retrofitting at 3 x 400V compressordesign).