Installation of heat pump and domestic hot water tank21.11.2015 23 / 76 Z20469Copyright 2013 by: WATERKOTTE GmbH. Subject to changes.7.2 Installation7.2.1 Installation of the heat pump moduleTransport the heat pump module to the intended site. Align the heat pump mod-ule in a horizontal position. To do this, use the set screws for height adjustment(under the corners of the unit), width across flats 30 mm7.2.2 Preparation of the assembly (EcoTouch Ai1 Geo)After completion of assembly the supply lines have to be accessible. Arrange themas follows: Place the connecting tubes (1) of the tank at the side of the unit (right) Place the terminal strip (2) for the electric connection and the connection ofthe display (3) at the front of the unit (right), see photo.21
