Wacker Neuson BS 50-2 Operator's Manual

Also see for BS 50-2: Operator's manual Repair manual Operator's manual Operator's manual Repair manual

Contents

Wacker Neuson BS 50-2 Operator's Manual Manual pdf 26 page image

wc_tx003047gb.fm26Operation BS 50-24.4 Position of the OperatorFor optimal control, performance, and minimal hand/arm vibration, follow theguidelines below when using the machine.Grasp the handle with both hands as shown.Stand behind the rammer, walking slowly and guiding the direction of travel as themachine moves forward.Note: Hand/Arm Vibration (HAV) has been optimized for the hand position shown.Reported HAV levels are measured at position A in conformance with EN 1033 andISO 5349.4.5 Before Starting1. Read safety instructions at the beginning of this manual.2. Fill tank with proper fuel mixture.3. Place the rammer on loose soil or gravel. Do not start the rammer on hardsurfaces such as asphalt or concrete.