Wacker Neuson BS 50-2 Operator's Manual

Also see for BS 50-2: Operator's manual Repair manual Operator's manual Operator's manual Repair manual

Contents

Wacker Neuson BS 50-2 Operator's Manual Manual pdf 42 page image

wc_tx003048gb.fm42Maintenance BS 50-25.12 Long-Term StorageIntroduction This machine requires preventive maintenance before long-term storage.Performing preventive maintenance helps to preserve machine components andensures that the machine will be ready for future use.When Prepare your machine for extended storage if it will not be operated for 30 days ormore.Preparing forstorageFollow the procedures below to prepare your machine for storage.1. Complete any needed repairs.2. Replenish or change oils (engine, ramming sytem, etc.) per the intervalsspecified in the Periodic Maintenance table.3. 4-cycle machines only: Consult the engine owner’s manual for instructions onpreparing the engine for storage.Stabilizing thefuelAfter completing the procedures listed above, fill the fuel tank completely and add ahigh-quality stabilizer to the fuel. Choose a stabilizer that includes cleaning agents and additives designed tocoat/protect the cylinder walls. Make sure the stabilizer you use is compatible with the fuel in your area, fueltype, grade and temperature range. Do not add extra alcohol to fuels whichalready contain it (for example, E10). Add the correct amount of stabilizer per the manufacturer’s recommendations.Storing themachinePerform these remaining steps to store your machine.1. Wash the machine and allow it to dry.2. Move the machine to a clean, dry, secure storage location.3. Secure the machine in an upright position.4. Cover the machine.