wc_tx004029gb_FM10.fm155Rammer Disassembly and Reassembly4.44 Installing the Spring System Cover—Spring Box ToolRequirements ■ Spring box tool P/N 5000081423■ Loctite® 243■ New gasketBackground There are two methods for installing the spring system cover: The preferredmethod is using the special spring box tool P/N 5000081423. For those who don'thave the special tool, the hydraulic press method used.Procedure Perform the procedure below to install the spring system cover.This procedure continues on the next page.WARNINGPersonal injury hazard. The spring system cover is under high pressure. If thespring system cover is removed incorrectly, the springs can eject with enough forceto cause serious injury or death!► Only remove the spring system cover using the hydraulic press or spring boxtool method.To view an animation of this procedure, internet accessis needed.To view the animation, click on the video icon or scanthe QR code with a smart phone.
