Wacker Neuson BS 50 Repair Manual

Also see for BS 50: Operator's manual Repair manual

Contents

Wacker Neuson BS 50 Repair Manual Manual pdf 50 page image

Engine and Upper Machine Components Rammer Repair50 wc_tx001546gb.fm4.14 Fuel Tank (DS Models)See Graphic: wc_gr001313rm4.14.1 Remove the silencing cover.4.14.2 Disconnect the fuel supply line (f) and fuel return line (c) from the fueltank and drain the fuel into a suitable container.Note: In the interests of environmental protection, place a plastic sheetand a container under the machine to collect any liquid which drainsoff. Dispose of this liquid in accordance with environmental protectionlegislation.4.14.3 Remove the M6 screw that holds the fuel tank to the guide handle.When reinstalling the fuel tank, apply Loctite 243 and torque the screwto 9.4 Nm (6.9 ft.lbs.).4.14.4 To remove the fuel filter (b), unscrew the two nuts (e) holding the fuelsupply valve (d) to the fuel tank. The fuel supply valve will come off.4.14.5 Unscrew the cap (a) from the tank.4.14.6 Carefully remove the fuel filter with needle-nose pliers.4.14.7 Replace the fuel filter if the paper element is torn, punctured, orclogged.4.14.8 Clean the inside of the fuel tank to remove any sediment.