Engine and Upper Machine Components Rammer Repair52 wc_tx001546gb.fm4.15 Fuel Tank CapSee Graphic: wc_gr004562To disassemble and clean the fuel tank cap:4.15.1 Grasp the fuel tank cap (a) in one hand and the baffle (b) in the other.4.15.2 Pull and twist the baffle left and right to separate it from the fuel tankcap.4.15.3 Remove the fuel tank gasket (c) from the baffle.4.15.4 Remove the green umbrella valve (d).4.15.5 Remove the two screws (e), the diaphragm retainer (f), and then thediaphragm itself (g).4.15.6 Clean all parts with soapy water and rinse thoroughly. DO NOT usechemical solvents.To reassemble the fuel tank cap:4.15.1 Insert the green umbrella valve (d) into the top side of the baffle (b).Press on the valve to seat it properly in the baffle.4.15.2 Re-install the diaphragm (g) and attach the diaphragm retainer (f) withthe two screws (e). Torque the screws to 0.28 Nm (2.5 in.lbs.), beingcareful not to strip them.4.15.3 Re-install the fuel tank gasket (c) on the baffle.4.15.4 Place the baffle assembly in the fuel tank cap (a). Use a screwdriver orsimilar blunt instrument to work the fuel tank gasket into the threads ofthe fuel tank cap until the baffle assembly snaps into place.
